Dynamic Avila Elite 1-2-person Ultra Low EMF FAR Infrared Sauna

Bring studio-quality wellness home. The Dynamic Avila Elite packs 7 PureTech™ ultra-low EMF carbon heaters into a compact, hemlock-wood cabin sized for one (cozy for two). You’ll get even, gentle FAR infrared heat, chromotherapy lighting with a built-in Red Light feature, Bluetooth/MP3 audio, and simple 120V plug-and-play setup—no electrician for 220V needed.

Highlights

• Ultra-low EMF PureTech™ carbon panels (3–5 mG measured 2–3" from panels)

 

• 7 heaters: 2 rear, 2 on each side, 1 under the bench for full-body coverage

 

• Chromotherapy + Red Light wellness lighting system

 

• Bluetooth + MP3 aux audio with built-in speakers

 

• Interior LED control panel for temperature & time

 

• Canadian Hemlock interior/exterior, tempered-glass door

 

• 120V/15A plug & play (non-GFCI; dedicated outlet recommended)

 

• Indoor use; compact footprint that suits apartments and home gyms

Specifications

• Capacity: 1–2 people (best for 1; fits 2 seated closely)

 

• Wood: Natural reforested Canadian Hemlock

 

• Heaters: 7 × FAR infrared carbon panels (ultra-low EMF)

  • Rear wall (2), each side wall (2 + 2), under bench (1)

 

• Operating temp: Ideal 118–132°F; max up to 140°F

 

• Controls: Interior LED control panel (time/temperature)

 

• Lighting: Interior Chromotherapy color lighting + Red Light feature

 

• Sound: Bluetooth + MP3 aux with built-in speakers

 

• Glass: Clear tempered glass door

 

• Electrical: 120V / 15A (non-GFCI) plug & play; dedicated circuit advised

 

• Use: Indoor only

 

• Assembled size: 36" L × 39" W × 73" H

 

• Product weight: 250 lb

 

• Shipping (approx.): 1 carton, 260 lb; carton 16" L × 39" W × 73" H; ships LTL on pallet (pallet ~ 16" L × 74" W × 44" H, ~285 lb)

Specs reflect manufacturer sheets; minor variances are normal.

Controls, Lighting & Audio

• One-touch LED panel inside: set session time & target temperature.

 

• Chromotherapy modes plus Red Light setting for targeted brightness.

 

• Audio: pair your phone via Bluetooth or plug in (3.5mm) and enjoy speakers built into the cabin.

What’s in the Box

• Pre-wired wall & base panels with carbon heaters pre-installed

 

• Tempered-glass door assembly

 

• Bench & floor sections

 

• Power cord (120V)

 

• Hardware & clips for tool-less panel connection

 

• Owner’s guide & quick-start sheet

Installation

• Location: Dry, level, indoor space with at least 2–3" clearance around sides/back and ~6" above the roof for ventilation and assembly.

 

• Flooring: Hard, level surface (tile, vinyl, wood, concrete). If placing on carpet, use a rigid mat or platform.

 

• Power: 120V / 15A, non-GFCI receptacle on a dedicated circuit within 6–8 ft of the sauna. (Do not use extension cords. Consult a licensed electrician if unsure.)

 

• Assembly: Two adults, typically 60–90 minutes. Panels lock together; connect the control/data leads as labeled, then plug in.

 

• Break-in: First warm-up for 30–45 minutes on high with door slightly open to air off new-product odors.

FAQs

Is this really 1–2 person?

Yes. It’s perfect for one user to lounge. Two can sit side-by-side closely for short sessions.

 

How hot does it get?

Designed for 118–132°F sessions; can reach up to 140°F depending on room temperature and ventilation.

 

Do I need special wiring

No. It runs on standard 120V/15A. Use a non-GFCI dedicated outlet. Avoid extension cords.

 

What are the EMF levels?

Panels are ultra-low EMF (≈3–5 mG) measured 2–3" from the panel surface.

 

Can I put it in a garage or on carpet?

Indoor, climate-controlled spaces are best. If on carpet, place a rigid mat/platform under the base.

 

What’s maintenance like?

Wipe wood with a dry or slightly damp cloth after sessions; keep shoes out; crack the door to air out.