Dynamic Martin 1–2 Person Full Spectrum Near Zero EMF Infrared Sauna

Overview

The Dynamic Martin 1–2 Person Full Spectrum Near Zero EMF Infrared Sauna (DYN-6006-03 FS) offers a compact way to enjoy far- and near-infrared warmth at home. Designed for one or two users according to the current manufacturer listing, the Martin combines a natural Canadian Hemlock cabin with full-spectrum heating, integrated lighting and audio.

Its six infrared heaters include four PureTech™ Near Zero EMF far-infrared carbon panels and two separate near-infrared elements. This configuration gives the Martin both FAR and near-infrared heating rather than relying exclusively on far-infrared panels. The manufacturer’s Near Zero EMF specification relates to the far-infrared panels at a stated measurement distance, not to the entire cabin.

The 2026 Martin measures 39 inches wide, 36 inches deep and 73 inches high externally, with 35-inch-wide interior space. A clear tempered-glass door, interior chromotherapy lighting, separate red-light feature, Bluetooth/MP3 audio, roof vent and interior LED controls complete the residential setup.

The Martin uses a 120V/15A plug-in electrical connection on a dedicated circuit, according to the model-specific manual. Before ordering, confirm that your installation room has a suitable outlet, sufficient clearance and a floor capable of supporting the sauna and its users.

Features

Features

• Compact 1–2 Person Cabin: Designed for one or two occupants according to Golden Designs. Its 39-inch-wide cabin is especially useful for smaller indoor home wellness spaces.
• Six Full-Spectrum Infrared Heaters: Four PureTech™ far-infrared carbon heating panels and two separate near-infrared elements provide the manufacturer’s combined infrared configuration.
• PureTech™ Near Zero EMF FAR Panels: The manufacturer reports magnetic-field readings below 3 milligauss at a distance of approximately 2–3 inches from its far-infrared carbon panels. This is not a zero-EMF or whole-cabin claim.
• Two Near-Infrared Elements: Near-infrared elements supplement the four FAR panels and are distinct from the separate red-light lighting feature.
• Natural Canadian Hemlock: Constructed from reforested Canadian Hemlock, creating a warm, natural-looking cabin for indoor residential settings.
• Clear Tempered-Glass Door: The clear entrance adds an open appearance and allows more ambient light into the cabin.
• Interior LED Controls: Control heating and applicable operating settings without leaving the sauna.
• Chromotherapy Color Lighting: Interior multicolor lighting offers adjustable ambiance during sessions.
• Separate Red-Light Feature: Built-in red-light lighting is an atmosphere feature and should not be confused with a medical treatment system.
• Bluetooth Audio: Connect a compatible audio device wirelessly to the included speaker.
• MP3 Auxiliary Connection: A wired audio input provides an additional connection option for compatible devices.
• Roof Ventilation: The roof vent allows airflow adjustment in accordance with the operating manual.
• Dedicated 120V / 15A Electrical Service: The model-specific manual requires a dedicated 120-volt 15-amp circuit, not the 20-amp supply used by some larger Dynamic models.
• Clasp-Together Assembly: Factory-prepared wall and roof panels connect using the manufacturer’s clasp-and-guide assembly system.
• Indoor Use Only: Designed for dry, appropriately prepared residential interior spaces; outdoor installation voids relevant manufacturer coverage.

Specifications

What's Included

• Dynamic Martin DYN-6006-03 FS sauna floor, wall, roof and bench components
• Four factory-installed PureTech™ Near Zero EMF far-infrared carbon panels
• Two separate near-infrared heating elements
• Clear tempered-glass door and required door hardware
• Interior LED controls and temperature-sensing components
• Interior chromotherapy lighting and red-light feature
• Bluetooth/MP3 audio components with built-in speaker
• Roof vent, supplied panel clasps, guide inserts and associated assembly hardware
• Manufacturer assembly and operating documentation

Not Included: Dedicated circuit installation, electrical modifications, professional assembly, additional furniture or aftermarket accessories. Backrests, where offered, are separate. The Martin is a dry infrared sauna and does not include a traditional rock heater or steam generator.

Installation

Installation

Indoor Placement: Install the Martin indoors in a dry, level, well-ventilated residential area. The cabin weighs approximately 250 pounds before occupants are added, so confirm that the floor can support the complete operating load. Outdoor use is not permitted by the manufacturer and may void warranty coverage.

Space Planning: Current 2026 manufacturer dimensions are 39" W × 36" D × 73" H outside and 35" W × 33" D × 68" H inside. Plan extra room for opening the glass door, assembling large panels, operating the roof vent, accessing the electrical supply and performing maintenance. Follow the actual owner’s manual for installation clearances.

Electrical Connection: The DYN/SHS-6006-03 FS model-specific manual requires a 120VAC 15-amp dedicated circuit. This is a plug-in design when a compatible receptacle and dedicated supply are available. A qualified electrician should verify grounding, local electrical requirements and suitable protection. Do not use an extension cord, surge strip or outlet adapter, and do not substitute the electrical specifications from another Dynamic model.

Cabin Assembly: Golden Designs recommends two adults. Inspect all panels, glass and infrared elements for damage before assembling. Follow the manufacturer’s sequence for the floor, front wall, side and rear walls, bench, roof, door and electrical connections. The model uses clasps and guide inserts to connect components; make sure every connection is seated correctly before powering on.

Initial Inspection: Verify that the heating elements, interior controls, temperature sensor and lighting connections are secure and the door opens and closes safely. Do not operate equipment showing visible damage. Never pour water onto infrared heating panels or attempt to use the cabin as a steam sauna.

Operation and Usage

Operation And Usage

• Starting a Session: After the cabin is correctly assembled and connected, use the interior LED controls to select a suitable temperature and operating time according to the manual.
• Infrared Heating: The four FAR carbon panels and two near-infrared elements provide full-spectrum heat. These are separate component types, not six identical FAR carbon heaters.
• Temperature and Preheating: Golden Designs lists 118°F–132°F as an ideal operating range and advertises up to 140°F. Heat-up time and achieved temperature depend on room conditions and settings.
• Near Zero EMF Terminology: The manufacturer’s below-3-mG figure refers to the far-infrared panels measured approximately 2–3 inches away. It is not an independent laboratory certification or whole-cabin EMF rating.
• Lighting: Use chromotherapy and the separate red-light feature to adjust the cabin ambiance, following the operating instructions. These functions do not imply disease treatment or other guaranteed health outcomes.
• Audio: Pair a Bluetooth-compatible phone or use the MP3 auxiliary input to play audio through the integrated speaker.
• Roof Vent: Adjust the roof vent to manage airflow in accordance with the owner’s manual.
• Duration and Hydration: Begin with shorter sessions and moderate temperatures, stay hydrated and leave immediately if you feel faint, nauseated or unwell.
• Sauna-Safe Materials: Use a towel on the bench to protect the wood. Keep towels and personal belongings clear of heating panels and any floor heating areas.
• Cleaning: Turn off the equipment, allow it to cool and clean wood gently according to the manufacturer’s instructions. Avoid excessive moisture, harsh chemicals and applying water to heaters.
• Routine Inspection: Inspect glass, wood surfaces, heater panels, controls and electrical connections regularly. Discontinue use and contact qualified service if damage or faults are present.
• After Each Session: Power off the infrared heating system and allow the sauna to cool and dry in accordance with manufacturer guidance.

Safety: Sauna heat exposure may cause dehydration or overheating. Avoid alcohol during use and do not leave children unattended. Anyone who is pregnant, has cardiovascular concerns or takes medication affecting heat tolerance should seek professional medical advice before use. The Martin is not a medical treatment device.

Compare compact models in our one-person infrared sauna selection, or explore additional layouts in the indoor infrared sauna collection.