Harvia Virta Pro HL200E 20 kW Sauna Heater 208V 3PH

Overview

Harvia Virta Pro HL200E is a 20 kW electric floor-standing heater for large private and professional sauna rooms. The 208 V, three-phase configuration is listed for sauna volumes of 353–1,130 cu. ft. It requires a separate compatible control and sauna stones.

Features

• 20 kW output for large sauna installations.
• Manufacturer-rated room range of 353–1,130 cu. ft.
• 208 V, three-phase, 60 Hz electrical configuration.
• Stone bed holds approximately 264.6 lb of stones.
• Designed for 10–15 cm sauna stones.
• Heating elements are divided into two groups.
• Harvia describes the elements as separated from the stones to support maintenance.
• Front maintenance access supports service without removing the full stone bed.
• Requires a separate external controller.
• Steel construction with vertical installation orientation.
• Floor-standing format for indoor sauna rooms.
• ETL certification listed by Harvia.
• IPX4 protection rating in Harvia's technical data.
• Built for heavy-duty use in larger commercial-style sauna settings.
• Net heater weight listed as approximately 50.7 lb; confirm the shipment specification for the exact item.

Specifications

What's Included

Harvia lists the heater and fastening kit in the delivery contents. A compatible external control and sauna stones are sold separately. Confirm current carton contents before installation.

Installation

• Confirm the room falls within Harvia's 353–1,130 cu. ft. range and follow manufacturer guidance for surfaces that affect room sizing.
• Have a licensed electrician verify 208 V, three-phase, 60 Hz service, overcurrent protection, conductor size, grounding and local-code requirements for this heater.
• Install the heater vertically and follow the current manual for clearances, sensor placement and external-control wiring.
• Load suitable 10–15 cm stones loosely to maintain airflow. Do not energize the heater without stones or with the unit covered.

Operation and Usage

Operate only through the compatible external control and follow the current Harvia heater and control manuals. Allow the sauna to preheat, then use clean water sparingly on the heated stones. Keep water away from the controller, wiring and other electrical components.

• Keep combustible materials away from the heater and maintain the manufacturer's stated safety clearances.
• Supervise children and avoid touching hot heater surfaces.
• Stop use and arrange qualified service if electrical components are damaged or the heater operates abnormally.
• Sauna bathing involves heat exposure and dehydration risk. Avoid alcohol and leave the sauna if you feel unwell.