Overview
The Maxxus MX-M356-01-FS CED 3-Person Corner Full Spectrum Near Zero EMF Infrared Sauna combines natural Canadian Red Cedar construction with two infrared heating technologies in an indoor residential corner cabin. Designed for up to three users, it includes bench seating, integrated touchscreen controls, lighting and audio.
The nine-element heating system has three PureTech™ Near Zero EMF far-infrared carbon panels and six separate near-infrared emitters. The manufacturer's under-3-milligauss EMF figure refers specifically to measurements approximately 2–3 inches from its FAR panels; it does not establish that the complete sauna is EMF-free.
The sauna features a bronze-tinted tempered-glass door, oversized chromotherapy lighting, a separate red-light lighting setting, exterior accent lights, FM radio, Bluetooth and an MP3 auxiliary connection. The current manufacturer listing specifies an interior touchscreen control panel.
The cabinet measures 60" W × 60" D × 75" H with a roof overhang extending another 9.4 inches along the depth. A dedicated 120V/20A electrical circuit is required. This full-spectrum model differs from the FAR-only Maxxus corner sauna, which has a separate SKU and heater configuration.
Features
-
Three-Person Corner Layout: Designed for up to three people in a corner-format cabin; verify the door swing and complete footprint when planning placement.
-
Nine Full-Spectrum Elements: Three PureTech™ far-infrared carbon panels plus six dedicated near-infrared elements, for two infrared heating technologies.
-
Near Zero EMF FAR Panels: Manufacturer-reported readings under 3 milligauss at approximately 2–3 inches from the FAR panels; not a whole-cabin measurement.
-
Six Near-Infrared Elements: Dedicated near-infrared emitters distinguish this full-spectrum model from the separate FAR-only Maxxus corner sauna.
-
Natural Canadian Red Cedar: Constructed with natural reforested Canadian Red Cedar for a distinctive appearance and wood aroma.
-
Bronze-Tinted Tempered Glass: Bronze-tinted entrance glass adds a coordinated design detail.
-
Integrated Three-Person Bench: Built-in seating within a 56-inch-wide by 56-inch-deep interior.
-
Oversized Chromotherapy Lighting: Interior color-lighting options customize the cabin atmosphere.
-
Separate Red-Light Feature: A red-light setting is part of the lighting system, distinct from the six near-infrared heating elements.
-
Exterior Accent Lighting: Decorative lighting complements the sauna's cedar exterior.
-
Interior Touchscreen: The current manufacturer listing specifies touchscreen controls for heating and supported cabin functions.
-
FM Radio: Built-in FM audio is included.
-
Bluetooth Connectivity: Use compatible devices for wireless audio through the integrated speakers.
-
MP3 Auxiliary Input: Wired audio connection for compatible equipment.
-
Built-In Speakers: Integrated audio playback without a separate portable speaker.
-
Dedicated 120V/20A Service: The manufacturer specifies a special dedicated 120-volt, 20-amp electrical circuit and matching receptacle.
-
Roof Vent: An integrated roof vent supports airflow management according to the supplied owner's manual.
-
Clasp-Together Assembly: Prefabricated components connect using the supplied clasps and installation hardware.
-
Indoor Residential Use: Designed for an appropriately prepared indoor home location; not an outdoor sauna.
-
Published Temperature Range: The manufacturer lists an ideal 118°F–132°F range and an advertised maximum of 140°F, depending on operating conditions.
Specifications
| Specification |
Details |
| Brand |
Maxxus Saunas / Golden Designs Inc. |
| Model / SKU |
MX-M356-01-FS CED |
| Category |
Corner Full-Spectrum Infrared Sauna |
| Rated Capacity |
3 People |
| Location |
Indoor Residential |
| Exterior Cabinet Dimensions |
60" W × 60" D × 75" H |
| Roof Overhang |
Adds 9.4 Inches to Depth |
| Interior Dimensions |
56" W × 56" D × 68" H |
| Wood |
Natural Reforested Canadian Red Cedar |
| Door |
Bronze-Tinted Tempered Glass |
| Total Heaters |
9 |
| Far-Infrared Carbon Panels |
3 PureTech™ Near Zero EMF FAR Panels |
| Near-Infrared Elements |
6 |
| EMF Measurement |
Manufacturer Reports Under 3 mG at 2–3 Inches from FAR Panels Only |
| Manufacturer Ideal Temperature |
118°F–132°F |
| Maximum Advertised Temperature |
Up to 140°F; Actual Performance May Vary |
| Electrical Supply |
120V AC / Dedicated 20-Amp Circuit |
| Receptacle |
Matching Dedicated 120V/20A Connection; Verify Local Code |
| Control Panel |
Interior Touchscreen, Current Manufacturer Listing |
| Interior Lighting |
Oversized Chromotherapy + Red-Light Feature |
| Exterior Lighting |
Accent Lighting |
| Audio |
FM Radio, Bluetooth, MP3 Auxiliary Input and Speakers |
| Ventilation |
Roof Vent |
| Assembly |
Prefabricated Clasp-Together Panels |
| Sauna Weight |
380 lb |
| Manufacturer Shipping Weight |
545 lb |
| Shipping Boxes |
3 |
| Updated Supplier UPC |
850041998329 |
What's Included
-
Cabin: Canadian Red Cedar floor, wall, roof and three-person bench components
-
FAR Heaters: Three PureTech™ Near Zero EMF far-infrared carbon panels
-
Near-Infrared Heaters: Six separate near-infrared elements
-
Door: Bronze-tinted tempered-glass door and associated hardware
-
Controls: Interior touchscreen control assembly, as listed for the current model
-
Lighting: Chromotherapy color lighting, red-light setting and exterior accent lights
-
Audio: FM, Bluetooth and MP3 auxiliary playback through integrated speakers
-
Assembly: Roof vent, panel clasps, wiring connectors and manufacturer-provided fasteners
-
Documentation: Manufacturer assembly and operating instructions
Electrical circuit installation, professional assembly, unrelated accessories and furniture are not included. This dry infrared sauna does not have a traditional stone heater or steam generator.
Installation
-
Measure the Complete Space: The cabinet measures 60 inches wide, 60 inches deep and 75 inches high. The roof extends an additional 9.4 inches in depth. Leave room for the door swing, assembly, ventilation and service. Use the model-specific plans for actual clearances.
-
Choose an Indoor Location: Position on a dry, level floor that safely supports the approximately 380-pound sauna plus its users. Outdoor weather exposure is not approved for this model.
-
Provide Dedicated Electrical Service: The manufacturer specifies a special 120V/20A dedicated receptacle and breaker, not a shared 15-amp outlet or 220V/240V supply. Have a licensed electrician verify the supplied plug, circuit, grounding and applicable local electrical code.
-
Resolve Protection Requirements: Golden Designs describes a non-GFCI electrical configuration. The electrician must reconcile the manufacturer's instructions with local code and required protection; do not assume that GFCI protection may legally be omitted.
-
Avoid Unapproved Connections: Do not use an extension cord, power strip, voltage adapter or improvised receptacle.
-
Plan Delivery and Unpacking: The manufacturer lists three cartons and a shipping weight of 545 pounds. Check the access route and inspect wood, glass, heaters, wiring and controls for damage before assembly. Delivery services follow confirmed order terms.
-
Assemble the Cabin: Install prefabricated floor, walls, bench, roof and glass door in the manufacturer's sequence. Secure clasps carefully, and use assistance for large wood and glass panels.
-
Connect Both Heater Types: Follow the model-specific diagrams for the three FAR panels, six near-infrared elements, controls, lights and sound. Keep wiring clear of moving parts and avoid pinched connectors.
-
First-Use Checks: Confirm the door, ventilation, wiring and controls work before the first session. Never pour water onto infrared elements or try to use this as a steam sauna.
Operation and Usage
Use the control system according to the manual supplied with the exact production unit. The three FAR heating panels, six NIR elements and separate red-light lighting feature serve different functions and should not be confused.
-
Start and Preheat: Use the interior touchscreen to adjust temperature and time according to the manual. Heat-up duration depends on room conditions.
-
Understand the Heater Count: The nine heaters comprise three FAR carbon panels and six NIR emitters. The separate red-light feature is lighting, not an additional infrared heater.
-
Understand Near Zero EMF: The below-3-mG figure is a manufacturer report for the FAR panels at 2–3 inches. It is not proof of a zero-EMF whole cabin or equivalent levels from NIR emitters.
-
Use Reasonable Temperature Settings: The manufacturer's ideal range is 118°F–132°F; up to 140°F is advertised, not guaranteed under all conditions.
-
Customize Lighting: Select supported chromotherapy colors and red-light settings for atmosphere, without assuming medical benefits.
-
Play Audio: Use FM radio, Bluetooth or a compatible MP3 auxiliary source with the integrated speakers.
-
Manage Ventilation: Adjust the roof vent as directed and keep air openings unobstructed.
-
Session Comfort: Start with shorter sessions at moderate heat, remain hydrated and leave promptly if dizzy, nauseated or unwell.
-
Avoid Heater Contact: Keep towels, exercise equipment and personal items off the emitters and do not modify the bench or heating arrangement.
-
Clean the Cedar: Allow the cabin to cool, then follow manufacturer-approved cleaning methods. Avoid excessive moisture or harsh cleaners.
-
Inspect Periodically: Check electrical connections, heater elements, glass and wood for damage; stop use if problems are suspected.
-
Cedar Allergies: Cedar can irritate skin, eyes or breathing in sensitive individuals. Discontinue use if symptoms develop.
Safety: Sauna heat can lead to overheating and dehydration. Avoid alcohol before or during use, supervise children, and leave immediately if unwell. People who are pregnant, have cardiovascular conditions or use medicines affecting heat tolerance should seek individualized medical advice. This sauna is not a medical treatment device.
Explore comparable models in the 3–4 person infrared sauna collection or browse full-spectrum indoor infrared saunas.