Maxxus 3-Person Near Zero EMF FAR Infrared Sauna

Overview

The Maxxus 3-Person Near Zero EMF FAR Infrared Sauna (MX-K306-01-ZF CED) is a near zero emf far infrared sauna designed for 3 people. This model pairs Canadian Red Cedar construction with a model-specific FAR infrared heater layout, controls and integrated lighting.

Manufacturer-listed exterior dimensions are 64″ W × 44″ D × 75″ H exterior; roof overhang adds 5.9″ to depth. Measure the room and delivery route before ordering, including any roof overhang. Manufacturer reports under 3 mG about 2–3 inches from the panels; not a cabin-wide reading.

Compare similar sizes in the 3 people sauna collection or browse infrared sauna models.

Features

• Three-person cabin: The layout is designed for up to three users.
• Canadian Red Cedar construction: This SKU uses Canadian Red Cedar.
• Seven Near Zero EMF panels: The listed far-infrared heater system contains seven panels.
• Measured EMF qualification: The manufacturer's low-field statement applies approximately 2–3 inches from panels.
• Bronze tempered-glass door: A bronze-tinted tempered-glass door adds privacy.
• Interior chromotherapy lighting: Integrated color lighting supports selectable ambience.
• Red-light feature: A separate red-light feature is included in the lighting system.
• Interior LED control: The LED control panel is positioned inside the cabin.
• Bluetooth audio: Connect a compatible mobile device for Bluetooth playback.
• FM radio: The audio system includes FM radio.
• MP3 auxiliary input: Use the listed auxiliary input with a compatible audio source.
• Built-in speakers: Integrated speakers provide cabin audio.
• 120V/20A dedicated service: The manufacturer specifies dedicated 120V/20A service; confirm wiring and receptacle with an electrician.
• Indoor use: This model is specified for indoor residential installation.
• Three-person dimensions: Exterior dimensions are 64 × 44 × 75 inches, plus roof projection.

Specifications

What's Included

• Model-specific Maxxus sauna cabin components in Canadian Red Cedar
• Factory-installed heater system: 7 PureTech Near Zero EMF FAR infrared carbon panels
• Prefabricated wall, floor, roof and bench components
• Tempered-glass door and assembly hardware
• Control and temperature-system components
• Interior chromotherapy and separate red-light feature
• Audio system and built-in speakers
• Manufacturer-supplied wiring connectors and fasteners
• Manufacturer assembly and operating instructions

Not included: New electrical wiring or receptacles, professional assembly, unlisted accessories or separate wellness equipment. This infrared cabin is not a steam sauna.

Installation

• Measure first: Allow for 64″ W × 44″ D × 75″ H exterior; roof overhang adds 5.9″ to depth; confirm any roof projection, door swing, ventilation, access and service clearances.
• Plan freight handling: Cabin weight is 310 lb; shipping weight is 450 lb across 3 cartons. Arrange a clear delivery route and inspect all cartons before assembly.
• Prepare the floor: Place the cabin on a level, dry and structurally sound indoor surface able to support the sauna, occupants and contents.
• Verify power: This model requires 120V / 20A dedicated non-GFCI receptacle and breaker; not 220/240V. A qualified electrician should confirm the actual receptacle, circuit, breaker, grounding and local code before use. Do not substitute an extension cord, shared circuit or adapter.
• Assemble per manual: Follow the instructions for this exact SKU and control version. Keep the unit disconnected from power during assembly and do not modify its wiring.
• Keep dry: These infrared cabins are for indoor use only; do not expose the electronics or heating panels to water, steam or weather.

Operation and Usage

Follow the manual supplied with this exact model and control version. Warm-up and session conditions vary with the room and the user's comfort.

• Start gently: Set temperature and time according to the control instructions. Begin with a moderate temperature and shorter session; room conditions affect warm-up time.
• Heater setup: 7 PureTech Near Zero EMF FAR infrared carbon panels. The separate red-light feature is lighting and does not count as a heater.
• EMF context: Manufacturer reports under 3 mG about 2–3 inches from the panels; not a cabin-wide reading. This is the manufacturer's stated measurement condition, not a guarantee for every position or component.
• Temperature: The manufacturer lists 118°F–132°F as the ideal range and up to 140°F. Actual readings vary with room conditions and installation.
• Audio and lighting: Use compatible Bluetooth or MP3 audio and the lighting controls as described in the supplied manual. Lighting is not a medical intervention.
• Hydration and comfort: Drink fluids, avoid alcohol before or during use and leave promptly if dizzy, faint, nauseated or uncomfortable.
• Children and health: Supervise children. Pregnant users, people with cardiovascular conditions and those taking medicine that affects heat tolerance should consult a healthcare professional before use.
• Cleaning and inspection: Switch off and cool the cabin first. Follow manufacturer care directions; avoid excessive moisture and harsh cleaners. Stop use if wiring, glass, wood or heaters are damaged.

Safety: Sauna use involves heat exposure and possible dehydration or overheating. This product is not intended to diagnose, treat, cure or prevent disease.