Dynamic Heming Elite 2-person Corner Ultra Low EMF FAR Infrared Sauna

Slip a true spa experience into a smart corner footprint. The Dynamic Heming Elite seats two comfortably, wraps you in PureTech™ ultra-low EMF carbon heaters, and blends modern glass with warm Canadian hemlock. It plugs into a standard 120V/15A outlet, adds chromotherapy + a red-light feature, and includes Bluetooth audio—everything you want in a home infrared sauna without the contractor.

Highlights

• Corner design saves space while maximizing bench room (2-person capacity)

 

• 7 PureTech™ Ultra Low EMF FAR carbon heaters (≈3–5 mG at 2–3") placed for full-body coverage: 2 on each rear wall, 1 on each side wall, 1 under the bench

 

• Natural reforested Canadian Hemlock interior/exterior

 

• Bronze-tinted tempered glass door with side windows

 

• Interior and exterior LED control panels

 

• Chromotherapy color lighting + dedicated red-light feature

 

• Bluetooth & 3.5mm aux audio with built-in speakers

 

• Typical operating range 118–132°F; can reach up to ~140°F

 

• 120V / 15A “plug & play” (non-GFCI; dedicated circuit recommended)

 

• Designed for indoor use only

Specifications

Model: Dynamic Heming Elite (Corner)

Capacity: 2 persons

Heating system: 7 × PureTech™ ultra-low EMF FAR carbon panels (≈3–5 mG @ 2–3")

Wood: Natural reforested Canadian Hemlock

Glass: Bronze tinted tempered glass door + side windows

Electrical: 120V / 15A, non-GFCI receptacle; dedicated circuit recommended

Temperature: 118–132°F typical; up to ~140°F

Product weight: 345 lb

Exterior dimensions: 48" L (+2" canopy overhang) × 49" W × 76" H

Use: Indoor only

 

Shipping & Packing

• Ships LTL, curbside delivery on a pallet

 

• Cartons (3 total)

  • Carton A: 150 lb — 10" L × 31" W × 70" H

  • Carton B: 98 lb — 7" L × 49" W × 70" H

  • Carton C: 128 lb — 8" L × 48" W × 49" H

 

• Palletized: 26" L × 73" W × 56" H; ~420 lb total

Controls, Lighting & Audio

• Dual LED control panels (interior & exterior) for temp, time, lights, and audio

 

• Chromotherapy color lighting system + Red-Light feature

 

• Audio: Built-in Bluetooth receiver and MP3/aux input with integrated speakers

What’s In The Crate

• Pre-assembled wall/roof/floor panels with integrated carbon heaters

 

• Tempered glass door with hinges/handle, side-window panels

 

• Bench and floor grate

 

• LED control panels & wiring harnesses

 

• Chromotherapy light bar + red-light module

 

• Integrated speakers & audio lead

 

• Hardware pack & buckles

 

• Power cord (120V)

 

• Printed installation/user manual

Installation

• Location: Dry, indoor, level surface. Avoid wet rooms or direct outdoor exposure.

 

• Clearances: Leave a few inches around the unit and open space above for ventilation and assembly.

 

• Electrical: Standard 120V/15A non-GFCI outlet; use a dedicated circuit; do not use extension cords.

 

• Assembly: Panels connect with locking buckles; plug-in harnesses; hang the door; set the bench; connect lights and controls. Typical two-person setup time: ~1–2 hours.

 

• Flooring: Wood, vinyl, tile, or low-pile carpet are fine; ensure the surface is flat and stable.

FAQs

Does it need a dedicated circuit?

Recommended. The unit runs on 120V/15A and should be plugged into a non-GFCI receptacle.

 

How low is the EMF?

PureTech™ ultra-low EMF panels measure approximately 3–5 milligauss at 2–3 inches.

 

How long to warm up?

About 15–30 minutes to the typical operating range (118–132°F), depending on room temperature.

 

Can I place it outdoors or in a garage?

No—this model is rated indoor-only. Keep it in a dry, climate-controlled space.

 

What comes with it?

All major panels with heaters factory-installed, glass door, bench, lighting & audio components, hardware, and the manual (see “What’s In The Crate”).

 

Delivery type?

Curbside LTL on a pallet. The driver sets it at the curb/driveway; bring panels inside individually.