Dynamic San Marino Elite 2-person Ultra Low EMF FAR Infrared Sauna

The Dynamic San Marino Elite is a compact, two-person FAR infrared sauna built from natural reforested Canadian hemlock. Six Ultra Low EMF carbon heating panels surround you (rear, sides, under-bench, and floorboard) for even, efficient warmth. A tempered-glass door, chromotherapy with a Red Light feature, and Bluetooth audio make every session relaxing and simple—just plug it into a standard 120V/15A household outlet.

Highlights

• Seats up to 2 people; indoor use only

 

• 6 Ultra Low EMF FAR infrared carbon panels

  • 2 × rear wall, 2 × side walls, 1 × under the bench, 1 × floorboard (EMF 3–5 mG at 2–3" from panels)

 

• Clear tempered glass door with side window

 

• Chromotherapy color lighting + Red Light feature

 

• Interior/Exterior LED control panels with digital timer & temperature

 

• Bluetooth & MP3 aux audio with built-in speakers

 

• Plug-and-play: 120V / 15A (non-GFCI, dedicated outlet recommended)

 

• Typical operating range 118–132°F, heats up to 140°F

 

• Curbside freight delivery on a pallet

Specifications

• Capacity: Full 2-person

 

• Exterior dimensions: 47" W × 42" D × 75" H (allow ~2" roof overhang at the back)

 

• Construction: Natural reforested Canadian Hemlock

 

• Glass: Clear tempered glass door / side window

 

• Heating elements: 6 PureTech™ Ultra Low EMF FAR infrared carbon panels (layout above)

 

• Electrical: 120V / 15A standard household outlet, non-GFCI (dedicated circuit recommended)

 

• Temperature: Ideal 118–132°F; max ~140°F

 

• Product weight: 320 lb

 

• Shipping (LTL, curbside): Ships in 2 cartons

  • Carton A: 11" L × 48" W × 73" H — 238 lb

  • Carton B: 9" L × 42" W × 47" H — 93 lb

  • Pallet dims: 20" L × 74" W × 54" H — 375 lb total

Controls, Lighting & Audio

• LED control panels (interior & exterior) with session timer and temperature setpoints

 

• Chromotherapy color cycle + Red Light feature

 

• Bluetooth streaming + 3.5mm Aux; built-in speakers

In the Box

• Pre-wired wall, floor, and roof panels with quick-connect harnesses

 

• Bench and heater covers

 

• Control panels, chromotherapy light module, speakers (factory-installed)

 

• Power cord (120V/15A) & hardware kit

 

• Printed assembly & installation guide

Installation

1. Location: Indoors only on a flat, dry, level surface (avoid wet areas).

2. Space check: Minimum footprint 47" W × 42" D; allow a little space behind/above for ventilation and assembly.

3. Assembly: Two adults recommended; panels lock together and color-coded leads snap in. Typical build time ~1–2 hours.

4. Power: Plug directly into a dedicated 120V/15A non-GFCI outlet. Do not use extension cords or power strips.

5. First use: Power on, let it warm up, and wipe interior surfaces with a soft, dry cloth after the first cycle.

FAQs

Does it need an electrician?

Usually no. It plugs into a standard 120V/15A outlet; a dedicated, non-GFCI receptacle is recommended. Consult a licensed electrician if you’re unsure.

 

Is it safe to use on carpet?

Low-pile carpet is generally fine, but a firm, level surface (tile, LVP, wood) is best.

 

How long to heat up?

Typically 20–30 minutes to reach 120–130°F depending on room temperature and ventilation.

 

Can I place it in a garage, patio, or outdoors?

No—indoor use only in a clean, dry, climate-controlled space.

 

What are the EMF levels?

Panels are Ultra Low EMF—approximately 3–5 mG at 2–3 inches from the heating panels.

 

How is delivery handled?

LTL curbside on a pallet. The carrier schedules delivery; the driver places the pallet at the curb/driveway. Bring the cartons inside before assembly.