Dynamic Serena Elite 2-person Ultra Low EMF FAR Infrared Sauna

Bring spa-grade recovery home with the Dynamic Serena Elite. Built from natural reforested Canadian Hemlock and powered by seven ultra-low EMF carbon panels, this compact 2-person sauna plugs into a standard 120V outlet and delivers even, gentle FAR infrared heat. Chromotherapy plus a dedicated Red-Light feature, Bluetooth audio, and a clean glass door + side window complete a premium, plug-and-play experience.

Highlights

• Seats 2 adults comfortably

 

• 7 ultra-low EMF FAR infrared carbon heating panels

  • EMF typically 3–5 mG at 2–3 in from panels

  • Panel layout: 2 rear, 2 each side, 1 under bench

 

• Natural Canadian Hemlock interior & exterior

 

• Clear tempered-glass door with side window

 

• Chromotherapy lighting + Red-Light feature

 

• Bluetooth + AUX audio with built-in speakers

 

• Interior LED control panel

 

• Heats to up to 140°F (ideal range 118–132°F)

 

• 120V / 15A Plug & Play (non-GFCI; dedicated outlet recommended)

 

• Indoor use only

Specifications

• Model: Dynamic Serena Elite – 2-Person Ultra Low EMF FAR Infrared Sauna

 

• Capacity: 2 persons

 

• Wood: Natural reforested Canadian Hemlock

 

• Heating System: 7 carbon FAR infrared panels (ultra-low EMF ~3–5 mG @ 2–3")

 

• Glass: Clear tempered door + side window

 

• Temperature: Heats up to 140°F (ideal use 118–132°F)

 

• Electrical: 120V / 15A, standard household outlet, non-GFCI, dedicated circuit recommended

 

• Overall Dimensions (L × W × H): 40" × 46" × 75"

 

• Product Weight: 310 lb

 

• Shipping (LTL, on pallet): 20" × 78" × 53", approx. 370 lb

  • Carton A: 10" × 47" × 76", 245 lb

  • Carton B: 7" × 41" × 45", 73 lb

 

• Location: Indoor use only

Controls, Lighting & Audio

• Interior LED control panel for time & temperature

 

• Chromotherapy color lighting system + dedicated Red-Light feature

 

• Bluetooth streaming + 3.5mm AUX input with built-in speakers

 

• Soft interior lighting for comfortable sessions

Inside the Crate

• Pre-assembled wall, floor, roof, and bench panels

 

• 7 carbon heating panels (factory-mounted) + under-bench heater

 

• Tempered-glass door & hardware

 

• Interior LED control panel

 

• Chromotherapy light module + Red-Light module

 

• Bluetooth/AUX speaker set

 

• Power cord (120V) & wiring harness

 

• Fasteners & assembly hardware

 

• Illustrated owner’s manual

Installation

• Electrical: 120V / 15A, non-GFCI receptacle; dedicated circuit recommended

 

• Placement: Dry, level indoor surface; allow a few inches of clearance around the unit

 

• Assembly: Two adults, typical build time 60–90 minutes (panels lock together)

 

• Ventilation: Use in a room with normal household airflow; keep vents unobstructed

 

• Use: Warm-up typically 20–30 minutes depending on ambient temperature

FAQs

How long does warm-up take?

About 20–30 minutes to reach typical operating range (118–132°F), depending on room temperature.

 

What does “ultra-low EMF” mean here?

Panels are engineered to emit approximately 3–5 mG measured 2–3 inches from the panel surface.

 

Can I plug it into any outlet?

Use a standard 120V / 15A non-GFCI outlet. A dedicated circuit is recommended for best performance.

 

Is hardwiring required?

No—this is a plug-and-play sauna.

 

Can it go on carpet or upstairs?

Yes, on a dry, level indoor surface. Most upstairs installations are fine; confirm floor can support the listed weight.

 

Is this for outdoor use?

No, the Serena Elite is indoor-only.