Dynamic Venice Elite 2-person Ultra Low EMF FAR Infrared Sauna

The Venice Elite is a compact, luxury 2-person infrared sauna built with Natural Reforested Canadian Hemlock and PureTech™ ultra-low EMF carbon heaters. It arrives plug-and-play on a pallet, assembles quickly, and brings chromotherapy + red-light, Bluetooth audio, and dual control panels into a quiet, indoor-only sanctuary.

Highlights

• PureTech™ Ultra Low EMF FAR infrared carbon heaters (3–5 mG at 2–3")

 

• 6 heating panels: 2 rear, 1 each side, 1 under bench, 1 floorboard

 

• Chromotherapy color lighting + Red-Light feature

 

• Bluetooth & MP3 aux with built-in speakers

 

• Interior & exterior LED control panels

 

• Bronze-tinted tempered glass door with side windows

 

• 120V / 15A plug-and-play (non-GFCI; dedicated outlet recommended)

 

• Natural Hemlock construction, indoor use only

Specifications

• Capacity: 2 persons

 

• Operating temp: Ideal 118–132°F; heats up to ~140°F

 

• Wood species: Natural Reforested Canadian Hemlock

 

• Glass: Bronze-tinted tempered

 

• Product dimensions/weight: 42” + 4.2” L × 50” W × 77” H, ~375 lb

 

• Delivery: Curbside on a pallet by freight carrier

 

• Cartons (ships LTL):

  • A: ~140 lb — 7” L × 50” W × 69” H

  • B: ~138 lb — 8” L × 41” W × 70” H

  • C: ~120 lb — 10” L × 48” W × 50” H

  • Pallet: 26” L × 73” W × 55” H, ~435 lb total

 

• Electrical: 120 V / 15 AMP non-GFCI plug & play; dedicated outlet strongly recommended

 

• Location: Indoor use only

Controls, Lighting & Audio

• Dual LED control panels (interior & exterior) for time/temp/light/audio

 

• Chromotherapy color system + Red-Light feature

 

• Bluetooth receiver + 3.5 mm aux input with built-in speakers

Everything Included

• Venice Elite 2-Person Infrared Sauna (Hemlock)

 

• Pre-wired heater panels & control system

 

• Bronze-tinted tempered glass door & hardware

 

• Bench, floor heater panel, and ventilation

 

• Power cord (120V) & quick-install fasteners

 

• Printed assembly guide

Installation

• Power: Standard 120V / 15A circuit; non-GFCI outlet; dedicate the circuit when possible.

 

• Placement: Indoor, dry, level surface. Leave ~2–4" clearance at back/sides for ventilation.

 

• Assembly: 2 adults; typical build time 60–90 minutes; panels lock together—no special tools beyond a Phillips screwdriver.

 

• Flooring: Wood/tile/Vinyl/LVP fine. Avoid thick/high-pile carpet.

FAQs

Q: How low is the EMF?

A: PureTech™ heaters are rated ultra-low EMF (≈3–5 mG measured 2–3" from the panel).

 

Q: Does it need hardwiring?

A: No—this model is plug-and-play 120V on a dedicated 15A non-GFCI outlet.

 

Q: Can it go outdoors or in a garage?

A: This is an indoor-only sauna. Keep in a dry, climate-controlled space.

 

Q: How long to preheat?

A: Typically 20–35 minutes to reach the ideal 118–132°F range depending on room temp.

 

Q: What’s the best placement for two people?

A: Side-by-side on the bench; the rear + side panels provide even, surround heat.